InvestingMutual FundsBy Sheilandra Singh11 min read
ETF Investment Costs: How Small Charges Reduce Long-Term Returns

Two ETFs tracking the same Nifty 50 index can leave you with different amounts after ten years. The annual fee is one reason, but the price you pay when buying and selling units can also change your result.
For an etf investment, the useful question is not simply which fund advertises the lowest fee. It is how much of the index return reaches you after fund-level costs and the costs of your trades.
Key takeaways
- An expense ratio is reflected in an ETF's net asset value, or NAV. It is not a separate annual debit from your trading account.
- Tracking difference compares the fund's NAV return with its benchmark return; tracking error describes variation in that difference.
- The exchange price you receive depends on the available bids and offers, not just the published NAV.
- Compare funds tracking the same benchmark and check the dates behind every figure.
What does the expense ratio cost an etf investment over ten years?
An ETF expense ratio is the annual proportion of scheme assets used to meet fund expenses. Those expenses affect NAV as the fund operates, so the stated ratio is not an extra bill to subtract from a published NAV return. Even a modest difference can matter when money remains invested for years (SEBI, Master Circular for Mutual Funds, 2024).
Consider two hypothetical Nifty 50 ETFs. Assume ETF A charges 0.20% annually and ETF B charges 0.60%. On an initial investment of ₹1,00,000, those percentages correspond to ₹200 and ₹600 at the starting value. The actual rupee effect changes with the fund's assets and NAV (illustrative calculation, 2026).
For a simplified ten-year comparison, suppose the index grows at a constant 10% annually. Reduce that assumed rate by each hypothetical expense ratio and hold every other influence equal. The starting ₹1,00,000 becomes approximately ₹2.55 lakh in ETF A and ₹2.46 lakh in ETF B, a difference of roughly ₹9,000 (illustrative calculation, 2026).
Fund expenses affect the NAV return an investor receives (SEBI, Master Circular for Mutual Funds, 2024).
Share on LinkedIn · Share on X
At a glance
- Example investment: ₹1,00,000, held for ten years (illustrative calculation, 2026).
- Assumed annual fees: 0.20% for ETF A and 0.60% for ETF B (illustrative calculation, 2026).
- Illustrative ending gap: Approximately ₹9,000, before trading costs and taxes (illustrative calculation, 2026).
The example is a calculation, not a forecast or a comparison of actual schemes. Markets do not grow at a fixed rate, an expense ratio can change, and real tracking results involve more than the stated fee. No current Nifty 50 or Sensex ETF fee is implied by these assumptions.
Is a lower expense ratio enough to choose an ETF?
No. A lower expense ratio reduces one recurring source of drag, but it cannot tell you whether the fund followed its benchmark closely or whether you can buy its units at a reasonable exchange price. To compare costs fairly, start with ETFs following the same index, then inspect their fund documents and tradable quotes (SEBI, Development of Passive Funds circular, 2022).
The ETF expense ratio appears in scheme disclosures and fund factsheets. Look for the document date and the precise scheme before copying a figure into your comparison. A current fee should come from a current fund disclosure; a fee printed in an older article may no longer describe the scheme you can buy.
Next, examine NAV-based fund and benchmark returns over matching periods. NAV represents the value attributable to a fund unit after the scheme accounts for its assets and liabilities. Published NAV returns already reflect fund expenses, which means subtracting the stated expense ratio again would count those expenses twice (SEBI, Master Circular for Mutual Funds, 2024).
Finally, examine the price available on the exchange for the size of your order. Exchange prices can differ from NAV, and the quote you see may not be available for all the units you want. If you are considering an etf as investment for a long holding period, a low recurring fee matters, but a poor entry price still comes out of your money.
A Nifty 50 ETF and a Sensex ETF do not have identical benchmarks. Comparing their returns might help you choose market exposure, but it will not isolate how efficiently two funds track the same index. Settle the benchmark question first, then compare the funds that remain.

What do tracking difference and tracking error tell you?
Tracking difference is the gap between an ETF's NAV return and its benchmark return over a stated period. ETF tracking error describes how much the return gap varies across observations, rather than the total shortfall over one holding period. Both measures need a named benchmark and comparable dates to be useful (SEBI, Development of Passive Funds circular, 2022).
Suppose a benchmark gains 10% over a year while a hypothetical ETF's NAV gains 9.7%. The ETF trails by 0.3 percentage points. Applied to ₹1,00,000 at the start, that return gap represents about ₹300 less in ending NAV value, before considering your exchange prices or personal transaction costs (illustrative calculation, 2026).
Do not treat that ₹300 as a new charge to add to the expense ratio. The NAV return in the example already incorporates fund-level expenses. Other influences on tracking can include how the portfolio is managed, cash held by the scheme, and the costs of adjusting its holdings (SEBI, Development of Passive Funds circular, 2022).
Tracking error answers a different question: was the ETF's relative performance fairly consistent, or did the gap fluctuate? Two funds can report a similar return gap over one chosen period while taking different paths to get there. Neither historical measure guarantees that the next period will look the same.
When reading a factsheet, check whether the benchmark return shown is appropriate for comparison with the scheme return and whether the measurement period matches. Do not compare one fund's recent tracking figure with another fund's figure from a different date. This article gives no current tracking-error ranking because such a ranking would require dated scheme disclosures for every fund named.
How can impact cost change what you pay for ETF units?
Impact cost concerns the price effect of placing an order relative to a reference price, often the midpoint between the best bid and offer. For a retail investor, the immediate practical checks are the bid-ask spread and how many units are available at each quoted price. A displayed price may not cover your entire order (NSE, ETF market information and order-book guidance, undated).
The bid is a price a buyer offers, while the ask is a price at which a seller offers units. If the best bid is ₹99.80 and the best ask is ₹100.20, an investor buying at the ask and immediately selling at the bid loses ₹0.40 per unit before brokerage or other charges. For 1,000 units, that is ₹400, assuming both quotes remain available for the full quantity (illustrative calculation, 2026).
That ₹400 illustrates the quoted spread, not an officially reported impact-cost figure for any ETF. An actual order may fill at several prices if the quantity available at the best quote is too small. The resulting execution cost depends on the order size and the depth of the order book when the trade occurs.
Compare the exchange quote with the latest available NAV, but remember that NAV and a live quote are not necessarily measured at the same moment. If an illustrative NAV is ₹100 and you buy 500 units at ₹100.50, the ₹0.50 difference adds ₹250 to your purchase price relative to that NAV. That comparison alone does not prove the ETF is permanently overpriced (illustrative calculation, 2026).
For an infrequent buyer, an unfavourable purchase price may be tolerable only if the overall investment case still makes sense. For a trader who enters and exits often, spreads and execution prices can recur with every round trip. Neither investor should assume that a low published fund fee makes trading free.

How should you compare Indian ETFs before placing an order?
Compare like with like first: the same benchmark, similar return periods, and disclosures dated closely enough to be meaningful. Then separate costs that affect the fund's NAV from prices and charges that apply to your own trade. This sequence helps prevent double counting and makes a low-fee claim easier to test (SEBI, Development of Passive Funds circular, 2022).
Use this checklist rather than choosing solely from a headline expense ratio:
- Confirm the benchmark. Read the scheme name and benchmark in its current factsheet or scheme documents. Do not assume similarly named ETFs hold the same exposure.
- Record the current stated expense ratio. Note the disclosure date and scheme. If you cannot find a current figure, do not substitute an old comparison article.
- Compare dated NAV returns and tracking measures. Use matching periods, and check whether the benchmark and return convention are comparable. Remember that the fund's NAV return already includes fund expenses.
- Inspect the live order book. Look at the bid, ask and quantities offered near each price. Check whether your proposed order is large relative to the units displayed.
- Review your transaction costs. Brokerage and other applicable trading charges affect your personal outcome even though they do not appear in the ETF's expense ratio. Your contract note provides the charges for an executed trade.
Consider using a limit order if you want to specify the maximum purchase price or minimum sale price you will accept. A limit does not guarantee execution, but it helps you avoid agreeing in advance to whatever price is available when the order reaches the market. Recheck the quote if you change the order size or trading time.
An etf investment calculator can help model the compounding effect of different assumed fees. Enter your own starting amount and holding period, and label every growth rate as an assumption. A calculator cannot predict the future spread, tracking difference, tax outcome or price at which you will eventually sell.
What is an etf investment fund, and which costs belong to you?
For a reader asking what is an etf investment fund, an exchange-traded fund is a mutual fund scheme whose units trade on an exchange. The scheme incurs fund-level expenses, while an investor trades its units at available market prices. Keeping those two layers separate is essential when assessing the total cost of ownership (AMFI, investor education on exchange-traded funds, undated).
Fund-level costs are borne within the scheme and reflected in NAV. Your exchange trade creates a separate question: what price did you pay or receive, and what transaction charges applied? A published expense ratio cannot answer that question because it describes the scheme, not the terms of your particular order.
The distinction also helps when reviewing past performance. A factsheet's NAV return is a fund measure, whereas your own return begins with the exchange price you actually paid. If you purchased above NAV or sold below it, your result can differ from the fund's published NAV return even when the published figures are accurate.
For a long-term holder, monitoring a fund's stated fee and tracking record may carry more weight than repeatedly checking intraday quotes. For an active trader, order-book depth and execution quality may deserve more attention. In either case, the right comparison depends on your benchmark, intended order size and expected holding period.
What this means for you
A sensible etf investment strategy in India begins with the exposure you want, then asks how efficiently a particular scheme and your intended trade can deliver it. Choose a benchmark, read the dated scheme disclosures, compare NAV-based tracking, and inspect the live bid and ask before placing an order. Keep your actual contract notes so you can distinguish fund performance from your own trading result.
If you already hold ETFs, review the costs of the schemes you own instead of switching merely because another fund advertises a lower fee. A switch involves a new sale and purchase, with prices and charges that belong in the decision. Historical tracking is useful evidence, not a promise of future returns.
Want a second look at the costs sitting inside your ETF portfolio? Contact PESB to ask for a review, bringing your scheme names, recent factsheets and contract notes so the discussion can focus on the figures relevant to you.
FAQs
Are etf a good investment if their expense ratio is low?
A low expense ratio can help, but it does not establish that an ETF suits your goals or that you can trade it at a reasonable price. Compare the benchmark, dated tracking results and available exchange quotes before deciding.
Does the expense ratio get deducted from my demat account each year?
No. The scheme accounts for fund expenses within its assets, which affects NAV rather than creating a separate annual debit in your demat account (SEBI, Master Circular for Mutual Funds, 2024). Your own trades may still involve separate charges.
Can tracking difference be added to the expense ratio to estimate total cost?
No. Tracking difference compares the ETF's NAV return with its benchmark return, and the NAV return already reflects fund expenses. Adding the full expense ratio again would double count that component.
Why did my ETF purchase price differ from its NAV?
ETF units trade at exchange prices set by available bids and offers, while NAV is a fund valuation. The two figures may also refer to different points in time, so compare their timestamps before drawing a conclusion (AMFI, investor education on exchange-traded funds, undated).
Mutual Fund investments are subject to market risks, read all scheme related documents carefully.
Related resource
- etf investment
- etf as investment
- what is an etf investment fund
- are etf a good investment
- ETF expense ratio
- ETF tracking error
This article is for information and education only and is not investment advice. Investments in securities market are subject to market risks; read all related documents carefully before investing.


